Change PCI Address for SW under MS-DOS

[w***@gmail.com]

I have a software which running on ms-Dos and I need to modify the PCI Address for the SW because i need to replace the PC by Newer one. After searching in the software I found the address pci address was written as (PIO32/32T(PCI) 0x1020,4128),I found that 0x1020 is the"Base Address Registers" but i could not found the reference for the other number (4128), what is the number 4128 refers to knowing that it isn't Device ID or Vender ID?

[JJ]

Post by w***@gmail.com
I have a software which running on ms-Dos and I need to modify the PCI
Address for the SW because i need to replace the PC by Newer one. After
searching in the software I found the address pci address was written as
(PIO32/32T(PCI) 0x1020,4128),I found that 0x1020 is the"Base Address
Registers" but i could not found the reference for the other number
(4128), what is the number 4128 refers to knowing that it isn't Device ID
or Vender ID?

Check the details of the PCI device first, using one of below tools.

Craig Hart's PCI
https://www.bttr-software.de/freesoft/system.htm

Dr.Hardware
https://web.archive.org/web/20200206033014/http://retro-net.de/drhard/

Dr.Hardware is in German language, but it's not difficult to get info about
the PIC devices. Just look for text with the word "PCI" and/or "hardware".

Post the info once you have them.